• BMW Bosch DME ME9.2 EK928 Engine Control Unit | OEM Remanufactured | Plug & Play
1 1

BMW Bosch DME ME9.2 EK928 Engine Control Unit OEM Remanufactured Plug & Play

BMW Bosch DME ME9.2 EK928 Engine Control Unit OEM Remanufactured Plug & Play

$750.00 USD
$750.00 USD
Sale Sold out
Shipping calculated at checkout.

Plug & Play — Full Data Cloning Included

BMW ME9.2 Remanufactured DME

Bosch EK928  ·  N62 4.4L V8  ·  Professional OEM Remanufacture (Like-New Appearance)

Part Numbers
12147600924 12147523524 7523524 7523523
Confirmed Fitment

BMW E65 / E66 7-Series (2000–2005) — 735i, 745i, 745Li — N62 4.4L V8

Common Failure Symptoms


No Communication

Your OBDII scanner cannot connect to the ECM. The module is completely unresponsive.

Crank, No Start

The engine turns over but will not fire. The DME is not authorizing fuel or ignition.

Limp Mode

Drastic power loss with "Engine Failsafe" or "Drive Moderately" dashboard warnings.

Random Misfires

Persistent misfires that don't resolve after replacing coils, plugs, or injectors.

Why the ME9.2 Fails


01

Age & Heat Cycles

After 15–20 years of engine bay heat, internal solder joints and processors degrade and become brittle, eventually causing intermittent or total failure.

02

Water Intrusion

Clogged E-Box cowl drains cause standing water to seep into the unit and short out the delicate circuitry — the most common cause on the E65/E66 chassis.

Full Data Transfer Included


✓
VIN

Vehicle Identification Number for seamless integration — no mismatch errors.

✓
Immobilizer (CAS) & Key Data

Your existing keys work immediately. No dealer EWS alignment required.

✓
Mileage & Service History

Dashboard and service records remain accurate and consistent.

✓
Full Flash & Injector Calibrations

Mirrors your car's specific factory tuning for optimal performance.

Why Choose Our Units


Specialized Expertise

We understand the specific architecture of the ME9.2. Every donor board is health-checked before processing — we don't just flip parts.

Restored Aesthetics

Old brittle stickers removed, housing refinished to look like a brand-new factory unit straight from the dealer.

Professional Bench Equipment

High-end bench-programming tools extract data even from units with "No Communication" via OBDII.

No Dealer Coding Required

By cloning your data precisely, we eliminate costly coding sessions after installation. Truly plug & play.

How the Process Works


1
PurchaseOrder this listing
2
Ship Your CoreSend us your original faulty or water-damaged DME
3
Data CloningOur technicians transfer VIN, keys, mileage, and calibrations to the remanufactured unit
4
We Ship It BackYour plug & play unit is on its way
5
Plug In & StartNo scanner, no dealer visit, no extra coding required

Technical Specifications


Manufacturer Bosch / BMW
Model ME9.2 / EK928
Primary Part Number 12147600924
Replaces 12147523524  ·  7523524  ·  7523523
Condition Professional OEM Remanufacture (Like-New)
Engine N62 4.4L V8
Compatibility BMW 7' E65 (2000–2005) 735i, 745i  /  7' E66 (2000–2005) 745Li
Service Included Full Data Transfer / Cloning (VIN, EWS, Mileage, Flash, Injector Cal.)

Important Note


Water Damage Prevention: If your original DME failed due to water damage, ensure your vehicle's cowl drain and E-Box drains are fully cleared and dry before installing the new unit. Failing to do so risks a repeat failure.
View full details

Remanufactured

We rebuild OEM control modules with upgraded components to prevent common failures. Unlike junkyard parts that may fail within months, our modules are thoroughly tested and backed by a 6-month warranty. If it fails under warranty, reprogramming is free.

How It Works

Ship us your faulty module. We extract your original data (VIN, mileage, key codes, calibrations) and transfer it to a remanufactured unit. Your old module is recycled for parts. You receive a plug-and-play replacement ready to install.

What to Expect

✓ Turnaround: 2-3 business days

✓ Warranty: 6 months

✓ Programming: Not required—plug and drive

✓ Core Required: Yes (your original module)

About ECU Maverick — OEM Remanufactured Plug & Play Control Modules

ECU Maverick supplies OEM-quality remanufactured control modules, pre-programmed and ready to install. Based in Fort Myers, Florida, we serve independent repair shops, dealerships, and vehicle owners nationwide.

Every module we sell is thoroughly tested, remanufactured to OEM specifications, and programmed to your specific vehicle. No dealer visits, no additional coding, no hassle, ust plug in and drive.

Vehicles We Support

We stock and program modules for European luxury and performance brands, including BMW, Mercedes-Benz, Audi, Porsche, Land Rover, Bentley, Ferrari, Lamborghini, Maserati, and Aston Martin. We also carry modules for domestic vehicles, heavy equipment, and marine applications.

Why Automotive Repair Facilities and Owners Buy From Us

Plug-and-Play Ready — Every module ships pre-programmed and coded to your VIN. No dealer required.

Fast Shipping — Most orders ship within 2–3 business days. Same-day rush available.

OEM Quality — Remanufactured to original equipment standards with component-level inspection and testing.

Direct Support — Text or call us to speak with a real person. We help you find the right module the first time.

6-Month Unlimited Mileage Warranty — Drive with confidence. Our warranty covers you regardless of how many miles you put on.

Our Commitment

We exist to keep your vehicle out of the dealership and back on the road—with quality parts, transparent pricing, and expert support from start to finish. Every module we sell meets the same standards we'd expect for our own vehicles.